Blog

AA22-057A: Destructive Malware Targeting Organizations in Ukraine

Original release date: February 26, 2022

Summary

Actions to Take Today:
• Set antivirus and antimalware programs to conduct regular scans.
• Enable strong spam filters to prevent phishing emails from reaching end users.
• Filter network traffic.
• Update software.
• Require multifactor authentication.

Leading up to Russia’s unprovoked attack against Ukraine, threat actors deployed destructive malware against organizations in Ukraine to destroy computer systems and render them inoperable. 

  • On January 15, 2022, the Microsoft Threat Intelligence Center (MSTIC) disclosed that malware, known as WhisperGate, was being used to target organizations in Ukraine. According to Microsoft, WhisperGate is intended to be destructive and is designed to render targeted devices inoperable. 
  • On February 23, 2022, several cybersecurity researchers disclosed that malware known as HermeticWiper was being used against organizations in Ukraine. According to SentinelLabs, the malware targets Windows devices, manipulating the master boot record, which results in subsequent boot failure. 

Destructive malware can present a direct threat to an organization’s daily operations, impacting the availability of critical assets and data. Further disruptive cyberattacks against organizations in Ukraine are likely to occur and may unintentionally spill over to organizations in other countries. Organizations should increase vigilance and evaluate their capabilities encompassing planning, preparation, detection, and response for such an event. 

This joint Cybersecurity Advisory (CSA) between the Cybersecurity and Infrastructure Security Agency (CISA) and Federal Bureau of Investigation (FBI) provides information on WhisperGate and HermeticWiper malware as well as open-source indicators of compromise (IOCs) for organizations to detect and prevent the malware. Additionally, this joint CSA provides recommended guidance and considerations for organizations to address as part of network architecture, security baseline, continuous monitoring, and incident response practices.

Click here for a PDF version of this report.

Technical Details

Threat actors have deployed destructive malware, including both WhisperGate and HermeticWiper, against organizations in Ukraine to destroy computer systems and render them inoperable. Listed below are high-level summaries of campaigns employing the malware. CISA recommends organizations review the resources listed below for more in-depth analysis and see the Mitigation section for best practices on handling destructive malware.   

On January 15, 2022, Microsoft announced the identification of a sophisticated malware operation targeting multiple organizations in Ukraine. The malware, known as WhisperGate, has two stages that corrupts a system’s master boot record, displays a fake ransomware note, and encrypts files based on certain file extensions. Note: although a ransomware message is displayed during the attack, Microsoft highlighted that the targeted data is destroyed, and is not recoverable even if a ransom is paid. See Microsoft’s blog on Destructive malware targeting Ukrainian organizations for more information and see the IOCs in table 1. 

Table 1: IOCs associated with WhisperGate

Name File Category File Hash Source
WhisperGate   stage1.exe 

a196c6b8ffcb97ffb276d04f354696e2391311db3841ae16c8c9f56f36a38e92

 Microsoft MSTIC  
WhisperGate stage2.exe

dcbbae5a1c61dbbbb7dcd6dc5dd1eb1169f5329958d38b58c3fd9384081c9b78

Microsoft MSTIC

 

On February 23, 2022, cybersecurity researchers disclosed that malware known as HermeticWiper was being used against organizations in Ukraine. According to SentinelLabs, the malware targets Windows devices, manipulating the master boot record and resulting in subsequent boot failure. Note: according to Broadcom, “[HermeticWiper] has some similarities to the earlier WhisperGate wiper attacks against Ukraine, where the wiper was disguised as ransomware.” See the following resources for more information and see the IOCs in table 2 below. 

Table 2: IOCs associated with HermeticWiper

Name File Category File Hash Source
Win32/KillDisk.NCV Trojan 912342F1C840A42F6B74132F8A7C4FFE7D40FB77
61B25D11392172E587D8DA3045812A66C3385451
 		 ESET research
HermeticWiper Win32 EXE 912342f1c840a42f6b74132f8a7c4ffe7d40fb77

SentinelLabs
HermeticWiper Win32 EXE 61b25d11392172e587d8da3045812a66c3385451

SentinelLabs
RCDATA_DRV_X64 ms-compressed a952e288a1ead66490b3275a807f52e5

SentinelLabs
RCDATA_DRV_X86 ms-compressed 231b3385ac17e41c5bb1b1fcb59599c4

SentinelLabs
RCDATA_DRV_XP_X64 ms-compressed 095a1678021b034903c85dd5acb447ad

SentinelLabs
RCDATA_DRV_XP_X86  ms-compressed eb845b7a16ed82bd248e395d9852f467

SentinelLabs
Trojan.Killdisk Trojan.Killdisk  1bc44eef75779e3ca1eefb8ff5a64807dbc942b1e4a2672d77b9f6928d292591 Symantec Threat Hunter Team
Trojan.Killdisk Trojan.Killdisk 0385eeab00e946a302b24a91dea4187c1210597b8e17cd9e2230450f5ece21da  Symantec Threat Hunter Team
Trojan.Killdisk Trojan.Killdisk a64c3e0522fad787b95bfb6a30c3aed1b5786e69e88e023c062ec7e5cebf4d3e Symantec Threat Hunter Team
Ransomware Trojan.Killdisk 4dc13bb83a16d4ff9865a51b3e4d24112327c526c1392e14d56f20d6f4eaf382 Symantec Threat Hunter Team

Mitigations

Best Practices for Handling Destructive Malware

As previously noted above, destructive malware can present a direct threat to an organization’s daily operations, impacting the availability of critical assets and data. Organizations should increase vigilance and evaluate their capabilities, encompassing planning, preparation, detection, and response, for such an event. This section is focused on the threat of malware using enterprise-scale distributed propagation methods and provides recommended guidance and considerations for an organization to address as part of their network architecture, security baseline, continuous monitoring, and incident response practices. 

CISA and the FBI urge all organizations to implement the following recommendations to increase their cyber resilience against this threat.

Potential Distribution Vectors

Destructive malware may use popular communication tools to spread, including worms sent through email and instant messages, Trojan horses dropped from websites, and virus-infected files downloaded from peer-to-peer connections. Malware seeks to exploit existing vulnerabilities on systems for quiet and easy access.

The malware has the capability to target a large scope of systems and can execute across multiple systems throughout a network. As a result, it is important for organizations to assess their environment for atypical channels for malware delivery and/or propagation throughout their systems. Systems to assess include:

  • Enterprise applications – particularly those that have the capability to directly interface with and impact multiple hosts and endpoints. Common examples include:
    • Patch management systems,
    • Asset management systems,
    • Remote assistance software (typically used by the corporate help desk),
    • Antivirus (AV) software,
    • Systems assigned to system and network administrative personnel,
    • Centralized backup servers, and
    • Centralized file shares.

While not only applicable to malware, threat actors could compromise additional resources to impact the availability of critical data and applications. Common examples include:

  • Centralized storage devices
    • Potential risk – direct access to partitions and data warehouses.
  • Network devices
    • Potential risk – capability to inject false routes within the routing table, delete specific routes from the routing table, remove/modify, configuration attributes, or destroy firmware or system binaries—which could isolate or degrade availability of critical network resources.

Best Practices and Planning Strategies

Common strategies can be followed to strengthen an organization’s resilience against destructive malware. Targeted assessment and enforcement of best practices should be employed for enterprise components susceptible to destructive malware.

Communication Flow
  • Ensure proper network segmentation.
  • Ensure that network-based access control lists (ACLs) are configured to permit server-to-host and host-to-host connectivity via the minimum scope of ports and protocols and that directional flows for connectivity are represented appropriately.
    • Communications flow paths should be fully defined, documented, and authorized.
  • Increase awareness of systems that can be used as a gateway to pivot (lateral movement) or directly connect to additional endpoints throughout the enterprise.
    • Ensure that these systems are contained within restrictive Virtual Local Area Networks (VLANs), with additional segmentation and network access controls.
  • Ensure that centralized network and storage devices’ management interfaces reside on restrictive VLANs.
    • Layered access control, and
    • Device-level access control enforcement – restricting access from only pre-defined VLANs and trusted IP ranges.
Access Control
  • For enterprise systems that can directly interface with multiple endpoints:
    • Require multifactor authentication for interactive logons.
    • Ensure that authorized users are mapped to a specific subset of enterprise personnel.
      • If possible, the “Everyone,” “Domain Users,” or the “Authenticated Users” groups should not be permitted the capability to directly access or authenticate to these systems.
    • Ensure that unique domain accounts are used and documented for each enterprise application service.
      • Context of permissions assigned to these accounts should be fully documented and configured based upon the concept of least privilege.
      • Provides an enterprise with the capability to track and monitor specific actions correlating to an application’s assigned service account.
    • If possible, do not grant a service account with local or interactive logon permissions.
      • Service accounts should be explicitly denied permissions to access network shares and critical data locations.
    • Accounts that are used to authenticate to centralized enterprise application servers or devices should not contain elevated permissions on downstream systems and resources throughout the enterprise.
  • Continuously review centralized file share ACLs and assigned permissions.
    • Restrict Write/Modify/Full Control permissions when possible.
Monitoring
  • Audit and review security logs for anomalous references to enterprise-level administrative (privileged) and service accounts.
    • Failed logon attempts,
    • File share access, and
    • Interactive logons via a remote session.
  • Review network flow data for signs of anomalous activity, including:
    • Connections using ports that do not correlate to the standard communications flow associated with an application,
    • Activity correlating to port scanning or enumeration, and
    • Repeated connections using ports that can be used for command and control purposes.
  • Ensure that network devices log and audit all configuration changes.
    • Continually review network device configurations and rule sets to ensure that communications flows are restricted to the authorized subset of rules.
File Distribution
  • When deploying patches or AV signatures throughout an enterprise, stage the distributions to include a specific grouping of systems (staggered over a pre-defined period).
    • This action can minimize the overall impact in the event that an enterprise patch management or AV system is leveraged as a distribution vector for a malicious payload.
  • Monitor and assess the integrity of patches and AV signatures that are distributed throughout the enterprise.
    • Ensure updates are received only from trusted sources,
    • Perform file and data integrity checks, and
    • Monitor and audit – as related to the data that is distributed from an enterprise application.
System and Application Hardening
  • Ensure robust vulnerability management and patching practices are in place. 
    • CISA maintains a living catalog of known exploited vulnerabilities that carry significant risk to federal agencies as well as public and private sectors entities. In addition to thoroughly testing and implementing vendor patches in a timely—and, if possible, automated— manner, organizations should ensure patching of the vulnerabilities CISA includes in this catalog.
  • Ensure that the underlying operating system (OS) and dependencies (e.g., Internet Information Services [IIS], Apache, Structured Query Language [SQL]) supporting an application are configured and hardened based upon industry-standard best practice recommendations. Implement application-level security controls based on best practice guidance provided by the vendor. Common recommendations include:
    • Use role-based access control,
    • Prevent end-user capabilities to bypass application-level security controls,
      • For example, do not allow users to disable AV on local workstations.
    • Remove, or disable unnecessary or unused features or packages, and
    • Implement robust application logging and auditing.
Recovery and Reconstitution Planning

A business impact analysis (BIA) is a key component of contingency planning and preparation. The overall output of a BIA will provide an organization with two key components (as related to critical mission/business operations):

  • Characterization and classification of system components, and
  • Interdependencies.

Based upon the identification of an organization’s mission critical assets (and their associated interdependencies), in the event that an organization is impacted by destructive malware, recovery and reconstitution efforts should be considered.

To plan for this scenario, an organization should address the availability and accessibility for the following resources (and should include the scope of these items within incident response exercises and scenarios):

  • Comprehensive inventory of all mission critical systems and applications:
    • Versioning information,
    • System/application dependencies,
    • System partitioning/storage configuration and connectivity, and
    • Asset owners/points of contact.
  • Contact information for all essential personnel within the organization,
  • Secure communications channel for recovery teams,
  • Contact information for external organizational-dependent resources:
    • Communication providers,
    • Vendors (hardware/software), and
    • Outreach partners/external stakeholders
  • Service contract numbers – for engaging vendor support,
  • Organizational procurement points of contact,
  • Optical disc image (ISO)/image files for baseline restoration of critical systems and applications:
    • OS installation media,
    • Service packs/patches,
    • Firmware, and
    • Application software installation packages.
  • Licensing/activation keys for OS and dependent applications,
  • Enterprise network topology and architecture diagrams,
  • System and application documentation,
  • Hard copies of operational checklists and playbooks,
  • System and application configuration backup files,
  • Data backup files (full/differential),
  • System and application security baseline and hardening checklists/guidelines, and
  • System and application integrity test and acceptance checklists.
Incident Response

Victims of a destructive malware attacks should immediately focus on containment to reduce the scope of affected systems. Strategies for containment include:

  • Determining a vector common to all systems experiencing anomalous behavior (or having been rendered unavailable)—from which a malicious payload could have been delivered:
    • Centralized enterprise application,
    • Centralized file share (for which the identified systems were mapped or had access),
    • Privileged user account common to the identified systems,
    • Network segment or boundary, and
    • Common Domain Name System (DNS) server for name resolution.
  • Based upon the determination of a likely distribution vector, additional mitigation controls can be enforced to further minimize impact:
    • Implement network-based ACLs to deny the identified application(s) the capability to directly communicate with additional systems,
      • Provides an immediate capability to isolate and sandbox specific systems or resources.
    • Implement null network routes for specific IP addresses (or IP ranges) from which the payload may be distributed,
      • An organization’s internal DNS can also be leveraged for this task, as a null pointer record could be added within a DNS zone for an identified server or application.
    • Readily disable access for suspected user or service account(s),
    • For suspect file shares (which may be hosting the infection vector), remove access or disable the share path from being accessed by additional systems, and
    • Be prepared to, if necessary, reset all passwords and tickets within directories (e.g., changing golden/silver tickets). 

As related to incident response and incident handling, organizations are encouraged to report incidents to the FBI and CISA (see the Contact section below) and to preserve forensic data for use in internal investigation of the incident or for possible law enforcement purposes. See Technical Approaches to Uncovering and Remediating Malicious Activity for more information.

    Contact Information

    All organizations should report incidents and anomalous activity to CISA 24/7 Operations Center at central@cisa.dhs.gov or (888) 282-0870 and/or to the FBI via your local FBI field office or the FBI’s 24/7 CyWatch at (855) 292-3937 or CyWatch@fbi.gov.

    Resources

    Revisions

    • February 26, 2022: Initial Revision

    This product is provided subject to this Notification and this Privacy & Use policy.